frescobaldi from git

classic Classic list List threaded Threaded
5 messages Options
Reply | Threaded
Open this post in threaded view
|

frescobaldi from git

Thomas Morley-2
Hi,

I just tried to get frescobaldi from git work.
No success.

I've read and reread all the READMEs and INSTALLs, now I'm heavily confused.
Could someone write (or point me to) a installation-guide for dummies?
Probably starting here
https://github.com/frescobaldi

I'm on Ubuntu-18.04 64-bit

Thanks,
  Harm

_______________________________________________
lilypond-user mailing list
[hidden email]
https://lists.gnu.org/mailman/listinfo/lilypond-user
Reply | Threaded
Open this post in threaded view
|

Re: frescobaldi from git

Urs Liska-3

Am 04.05.19 um 14:50 schrieb Thomas Morley:
> Hi,
>
> I just tried to get frescobaldi from git work.
> No success.
>
> I've read and reread all the READMEs and INSTALLs, now I'm heavily confused.
> Could someone write (or point me to) a installation-guide for dummies?
> Probably starting here
> https://github.com/frescobaldi


You *did* read this guide=
https://github.com/frescobaldi/frescobaldi/wiki/Run-Frescobaldi-3-on-Linux ?
(which was heavily discussed on this list).


>
> I'm on Ubuntu-18.04 64-bit


18.04 is not explicitly mentioned there but Linux Mint 19 is based on
Ubuntu 18.04, so there should be no problems.

HTH
Urs


>
> Thanks,
>    Harm
>
> _______________________________________________
> lilypond-user mailing list
> [hidden email]
> https://lists.gnu.org/mailman/listinfo/lilypond-user

_______________________________________________
lilypond-user mailing list
[hidden email]
https://lists.gnu.org/mailman/listinfo/lilypond-user
Reply | Threaded
Open this post in threaded view
|

Re: frescobaldi from git

Thomas Morley-2
In reply to this post by Thomas Morley-2
Am Sa., 4. Mai 2019 um 14:50 Uhr schrieb Thomas Morley
<[hidden email]>:

>
> Hi,
>
> I just tried to get frescobaldi from git work.
> No success.
>
> I've read and reread all the READMEs and INSTALLs, now I'm heavily confused.
> Could someone write (or point me to) a installation-guide for dummies?
> Probably starting here
> https://github.com/frescobaldi
>
> I'm on Ubuntu-18.04 64-bit
>
> Thanks,
>   Harm

To answer my own question, I did (all in \home)

(1) Clone the repository
git clone https://github.com/frescobaldi/frescobaldi.git

(2) What else is needed?
~$ apt-get install --dry-run frescobaldi
NOTE: This is only a simulation!
      apt-get needs root privileges for real execution.
      Keep also in mind that locking is deactivated,
      so don't depend on the relevance to the real current situation!
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following additional packages will be installed:
  libportmidi0 lilypond lilypond-data python3-poppler-qt5 python3-pyqt5.qtsvg
  python3-pyqt5.qtwebkit
Suggested packages:
  lilypond-doc
The following NEW packages will be installed:
  frescobaldi libportmidi0 lilypond lilypond-data python3-poppler-qt5
  python3-pyqt5.qtsvg python3-pyqt5.qtwebkit
0 upgraded, 7 newly installed, 0 to remove and 5 not upgraded.
Inst python3-poppler-qt5 (0.24.2-3build3 Ubuntu:18.04/bionic [amd64])
Inst libportmidi0 (1:217-6 Ubuntu:18.04/bionic [amd64])
Inst python3-pyqt5.qtsvg (5.10.1+dfsg-1ubuntu2 Ubuntu:18.04/bionic [amd64])
Inst python3-pyqt5.qtwebkit (5.10.1+dfsg-1ubuntu2 Ubuntu:18.04/bionic [amd64])
Inst frescobaldi (3.0.0+ds1-1 Ubuntu:18.04/bionic [all])
Inst lilypond-data (2.18.2-12build1 Ubuntu:18.04/bionic [all])
Inst lilypond (2.18.2-12build1 Ubuntu:18.04/bionic [amd64])
Conf python3-poppler-qt5 (0.24.2-3build3 Ubuntu:18.04/bionic [amd64])
Conf libportmidi0 (1:217-6 Ubuntu:18.04/bionic [amd64])
Conf python3-pyqt5.qtsvg (5.10.1+dfsg-1ubuntu2 Ubuntu:18.04/bionic [amd64])
Conf python3-pyqt5.qtwebkit (5.10.1+dfsg-1ubuntu2 Ubuntu:18.04/bionic [amd64])
Conf frescobaldi (3.0.0+ds1-1 Ubuntu:18.04/bionic [all])
Conf lilypond-data (2.18.2-12build1 Ubuntu:18.04/bionic [all])
Conf lilypond (2.18.2-12build1 Ubuntu:18.04/bionic [amd64])

(3) Install all but frescobaldi, lilypond, lilypond-data
(I do have LilyPond in multiple versions already, don't want to
distrub my setup)

(4) Navigate into frescobaldi-git-folder and install it
cd frescobaldi/
sudo python3 setup.py install


Ofcourse other systems may have different setup, so other stuff may be
needed, and it works only if frescobaldi is in the distro anyway.
Probably not the bleeding edge state of the dependency-software is caught.

Anyway, it worked for me.


Cheers,
  Harm

_______________________________________________
lilypond-user mailing list
[hidden email]
https://lists.gnu.org/mailman/listinfo/lilypond-user
Reply | Threaded
Open this post in threaded view
|

Re: frescobaldi from git

Thomas Morley-2
In reply to this post by Urs Liska-3
Am Sa., 4. Mai 2019 um 15:40 Uhr schrieb Urs Liska <[hidden email]>:

> You *did* read this guide=
> https://github.com/frescobaldi/frescobaldi/wiki/Run-Frescobaldi-3-on-Linux ?

No.

On
https://github.com/frescobaldi/frescobaldi
I couldn't find anything helpful.

Now that you provided the link, I _searched_ the site on
https://github.com/frescobaldi/frescobaldi for "wiki"
and found something, following it, I finally found the guide.

> (which was heavily discussed on this list).
Must have miss it or forgotten about it.

May I suggest to provide a direct link to the wiki in
https://github.com/frescobaldi/frescobaldi/blob/master/README.md
prominently.

Even trying to reproduce the above listed steps once more, I _again_
failed to find the wiki-link and had to search again.

Maybe now that I know there's probably a wiki I may come to grips how
to use openLilyLib as well.

> > I'm on Ubuntu-18.04 64-bit
>
>
> 18.04 is not explicitly mentioned there but Linux Mint 19 is based on
> Ubuntu 18.04, so there should be no problems.

Yep.

Cheers,
  Harm

_______________________________________________
lilypond-user mailing list
[hidden email]
https://lists.gnu.org/mailman/listinfo/lilypond-user
Reply | Threaded
Open this post in threaded view
|

Re: frescobaldi from git

Urs Liska-3

Am 04.05.19 um 16:08 schrieb Thomas Morley:
> Am Sa., 4. Mai 2019 um 15:40 Uhr schrieb Urs Liska <[hidden email]>:
>
>> You *did* read this guide=
>> https://github.com/frescobaldi/frescobaldi/wiki/Run-Frescobaldi-3-on-Linux ?
> No.
>
> On
> https://github.com/frescobaldi/frescobaldi
> I couldn't find anything helpful.


What is a pity is that you can't add any custom content on the
"organization"'s home page, which would be
https://github.com/frescobaldi, which is where I would mainly want to
have information on the various repositories (instead of just the list
of them) and things like links to websites and/or wikis.


> Now that you provided the link, I _searched_ the site on
> https://github.com/frescobaldi/frescobaldi for "wiki"
> and found something, following it, I finally found the guide.
>
>> (which was heavily discussed on this list).
> Must have miss it or forgotten about it.
>
> May I suggest to provide a direct link to the wiki in
> https://github.com/frescobaldi/frescobaldi/blob/master/README.md
> prominently.


I'll do that. I didn't really have in mind (in this case) that this is
the document that will be rendered on the landing page.


> Even trying to reproduce the above listed steps once more, I _again_
> failed to find the wiki-link and had to search again.
>
> Maybe now that I know there's probably a wiki I may come to grips how
> to use openLilyLib as well.


https://github.com/openlilylib/oll-core/wiki

A link I've also shared multiple times on this list. And this is the
more specific reason why I would want a customized organization page on
Github. With Frescobaldi it's clear which is the "main" repository but
with openLilyLib it is far from self-evident (although one *could*
infer) that there is one repository oll-core that has the Wiki ...

>
>>> I'm on Ubuntu-18.04 64-bit
>>
>> 18.04 is not explicitly mentioned there but Linux Mint 19 is based on
>> Ubuntu 18.04, so there should be no problems.
> Yep.

I've added it to the Wiki page.

Urs

>
> Cheers,
>    Harm

_______________________________________________
lilypond-user mailing list
[hidden email]
https://lists.gnu.org/mailman/listinfo/lilypond-user